Серия TNS5800-N
Монтаж в стойку 1U
12-портовый промышленный коммутатор Ethernet уровня 3 для железнодорожного транспорта
- Поддержка 4 интерфейсов Gigabit M12 (с 2 группами функции обхода), 8 интерфейсов 100M или Gigabit M12.
- Примите запатентованную технологию Ring, поддержите одиночное кольцо, соединительное кольцо, цепь, функцию двойного самонаведения.
- Поддержка 2 входов источника питания 110 В постоянного тока
- Поддержка степени защиты IP40
- Поддержка широкого диапазона рабочих температур -40 ~ 75 ℃.
| Standard & Protocol | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1Q for VLAN IEEE 802.1p for CoS IEEE 802.1X for 802.1X Authentication IEEE 802.1AB for LLDP IEEE 802.3af for PoE IEEE 802.3at for PoE+ ITU-T G.8032 for ERPS |
| Management | SNMP v1/v2c/v3 Centralized Management of Equipment, RMON, Port Mirroring, QoS, LLDP, DHCP Server, File Management, Port Statistics, Log Information, Static ARP, PoE Management |
| Security | Classification of User Permissions, ACL, NAT, 802.1X Authentication, Radius Server Authentication, Port Alarm, Power Alarm, Storm Suppression, SSHD Configuration, Telnet Configuration, Loop Detection, Aggregation Protection, Link Flapping Protection, DHCP Snooping |
| Switch Function | 802.1Q VLAN, Port Trunking, Bandwidth Management, Flow Control, Port Isolation |
| Unicast / Multicast | Static Multicast, IGMP-Snooping, PIM-SM, PIM-SM |
| Redundancy Technology | Ring, STP/RSTP/MSTP, ERPS |
| Troubleshooting | Ping, Traceroute, Port Loopback |
| Routing Technique | VRRP, RIP, OSPF |
| Time Management | NTP |
| Interface | Gigabit PoE M12:10/100/1000base-T (X), M12 (Female), 8-Pin X-Coded, automatic flow rate control, full/half duplex mode, MDI/MDI-X automatic detection; The maximum capacity of a single port is 30W PoE power supply output. Pin 1 and 2 of PoE power supply are positive, while pin 3 and 4 are negative Gigabit M12: 10/100/1000Base-T(X), M12(Female), 8-Pin X-Coded, Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X Autotunning；it supports two groups of Bypass 100M PoE M12:10/100base-T(X), M12 (Female), 4-Pin D-Coded, automatic flow control, full/half duplex mode, MDI/MDI-X automatic detection; The single port supports up to 30W PoE power supply output. Pin 1 and 3 of PoE power supply are positive, while pin 2 and 4 are negative Alarm interface: 8-pin 5.08mm pitch terminal blocks (includes 2-pin relay) or 7-pin Male M23 interface (includes 2-pin relay), support 1 relay alarm output, the current load capability is 1A@30VDC or 0.3A@125VAC. Console port: CLI command line management port(RS-232), RJ45 |
| Indicator | Power indicator, alarm indicator, running indicator, interface indicator, PoE indicator |
| Switch Property | Transmission mode: store and forward MAC address: 16K Packet buffer size: 12Mbit Backplane bandwidth: 128G Switch time delay: <10μs |
| Power Supply | TNS5800-8P4GT-2P110, TNS5800-8GP4GT-2P110： l Power supply range: 110VDC (66~156VDC), dual power supply redundancy l Connection method: 8-pin 5.08mm pitch terminal blocks (includes 6-pin power supply) l Connection protection: anti-reverse connection
TNS5800-16P4GT-2P110, TNS5800-16GP4GT-2P110： l Power supply range: 110VDC, dual power supply redundancy l Connection method: 7-pin Male M23 (includes 4-pin power supply) l Connection protection: anti-reverse connection |
| Power Consumption | Full load (no PoE load): < 20W Full load (including PoE load): ＜120W |
| Working Environment | Operating temperature: -40~75℃ Storage temperature:-40~85℃ Relative humidity: 5%～95% (no condensation) |
| Physical Characteristic | Housing: IP40 protection, metal Installation: 1U rack mounting Dimension (W x H x D): 482.6mm×44.45mm×200mm (lugs are included for 12-Port device) 441.6mm × 44.45mm × 290mm (no lugs for 20-Port device) |
| Industrial Standard | EN 50121-3-2: 2016 standard, Table 5.3 (Electrostatic Discharge), Class A l Air discharge:± 8kV l Contact discharge: ±6kV
EN 50121-3-2: 2016 standard, Table 3.3 (Surge), Class A l Power supply: common mode±2kV, differential mode±1kV
EN 50121-3-2: 2016 standard, Table 3.2 (Electrical Fast Transient Pulses), Class A l Power supply: ±2kV l Signal: ±2kV
EN 50121-3-2: 2016 standard, Table 5.1, 5.2 (Radio Frequency Electromagnetic), Class A l 80MHz~800MHz, 20V/m l 800MHz~1GHz, 20V/m l 1.4GHz~2.0GHz, 10V/m l 2.0GHz~2.7GHz, 5V/m l 5.1GHz~6GHz, 3V/m
EN 50121-3-2: 2016 standard, Table 3.1, 4.1 (Conducted Disturbance Induced by RF Fields), Class A l Power supply: 0.15MHz~80MHz, 10V l Signal: 0.15MHz~80MHz, 10V
EN 50121-3-2: 2016 standard, table 3.1 (Power Supply Conducted Disturbance) l 150kHz~500kHz, 79dBμV quasi-peak value l 500kHz~30MHz, 73dBμV quasi-peak value
EN 50121-3-2: 2016 standard, table 3.1 (Radiation Disturbance) l 30MHz~230MHz, ＜40dBμV/m quasi-peak value l 230MHz~1GHz, ＜47dBμV/m quasi-peak value
Shock: IEC 61373 Free fall: IEC 60068-2-32 Vibration: IEC 61373 |
| Authentication | CE, FCC, RoHS, EN50155, EN50121-3-2, IEC61373 |
| Warranty | 5 years |
| Available Models | 100M PoE M12 | Gigabit PoE M12 | Gigabit Bypass M12 | Power Supply |
| TNS5800-8P4GT-2P110 | 8 | – | 4 | 110VDC Redundant power supply |
| TNS5800-8GP4GT-2P110 | – | 8 | 4 | |
| TNS5800-16P4GT-2P110 | 16 | – | 4 | |
| TNS5800-16GP4GT-2P110 | – | 16 | 4 |